Проблема с офисом Майкрософт. При работе высвечивается окно: Inviled printer driver data type

Question

Алексей · Accepted Answer

А перевести слабо? 
Недопустимый тип данных драйвера принтера

Ольга Синельщикова · Answer

Скорее всего, нужно скачать новый подходящий драйвер. 
Но полагаю, что, если Вы не пользуетесь принтером, то сможете продолжать пользоваться компьтером.

Дарья Куликова · Answer

1. При печати не ставить галочку "Печать в файл" 
2. В параметрах принтера убрать галочку (отключить) "Дополнительные параметры печати" 
 
Оригинал статьи: 
 
Why does the printer report an Invalid printer driver data type error when printing? 
 
The “Invalid printer driver data type” error is generated by the printer driver when the printing application send the data to the driver with a data type different than the one used by the printer driver. The Black Ice printer supports the “NT EMF 1.003” data type (default) as well as the RAW data type and will not print with any other data types, and may not print if the printing application is using a data type other than the current data type set in the Black Ice printer driver. 
 
The error is generated in the following situations: 
 
The User, who has printed the document, checked the “Print to file” check box on the Print dialog box. The Black Ice printer driver converts the printed document to an image file without checking the “Print to file” check box. The User must not check the “Print to file” check box, because by checking it the system will force the printer driver to use the RAW data type. Also, by checking the “Print to file” check box, the system will connect the printer to the FILE port instead of the default Black Ice port, therefore the printing will not succeed. 
 
SOLUTION: Do not check the “Print to file” check box on the Print dialog box. 
 
The “Enable advanced printing features” check box on the Advanced tab of the printer’s Properties dialog box has been unchecked. By unchecking the “Enable advanced printing features” check box, the system will force the printer driver to use the RAW data type. 
 
SOLUTION: Open the Black Ice printer’s Properties dialog box and select the Advanced tab. Make sure that the “Enable advanced printing features” check box is checked. Click the “Print Processor…” button and select “NT EMF 1.003” as the data type.