Помогите!! ! Срочно нужно перевести и ответить на вопросы!!!

CONDUCTORS AND INSULATORS
All substances have some ability of conducting the electric current, however, they differ greatly in the ease with which the current can pass through them. Metals, for example, conduct electricity with ease while rubber does not allow it to flow freely. Thus, we have conductors and insulators.
What do the terms "conductors" and "insulators" mean? Substances through which electricity is easily transmitted are called conductors. Any material that strongly resists the electric current flow is known as an insulator.
Let us first turn our attention to conductance, that is the conductor's ability of passing electric charges. The four factors conductance depends on are: the size of the wire used, its length and temperature as well as the kind of material to be employed.
It is not difficult to understand that a large water pipe can pass more water than a small one. In the same manner, a large conductor will carry the current more readily than a thinner one.

It is quite understandable, too, that to flow through a short conductor is certainly easier for the current than through a long one in spite of their being made of similar material. Hence, the longer the wire, the greater is its opposition, that is resistance, to the passage of current.
As mentioned above, there is a great difference in the conducting ability of various substances. For example, almost all metals are good electric current conductors. Nevertheless, copper carries the current more freely than iron; and silver, in its turn, is a better conductor than copper.
Generally speaking, copper is the most widely used conductor. That is why the electrically operated devices in your home are connected to the wall socket by copper wires. Indeed, if you are reading this book by an electric lamp light and somebody pulls the metal wire out of the socket, the light will go out at once. The electricity has not been turned off but it has no path to travel from the socket to your electric lamp. The flowing electrons cannot travel through space and get into an electrically operated device when the circuit is broken. If we use a piece of string instead of a metal wire, we shall also find that the current stops flowing.
A material like string which resists the flow of the electric current is called an insulator. There are many kinds of insulation used to cover the wires. The kind used depends upon the purposes the wire or cord is meant for. The insulating materials we generally use to cover the wires are rubber, asbestos, glass, plastics and others.
Rubber covered with cotton, or rubber alone is the insulating material usually used to cover desk lamp cords and radio cords.
Glass is the insulator to be often seen on the poles that carry the telephone wires in city streets. Glass insulator strings are usually suspended from the towers of high voltage transmission lines. One of the most important insulators of all, however, is air. That is why power transmission line wires are bare wires depending on air to keep the current from leaking off.
Conducting materials are by no means the only materials to play an important part in electrical engineering. There must certainly be a conductor, that is a path, along which electricity is to travel and there must be insulators keeping it from leaking off the conductor.
Задание к тексту.
Answer the following questions.
1. What is discussed in the present article? 2. Do all substances conduct the electric current easily? 3. What is a conductor? 4. What does conductance depend upon? 5. What materials are the best conductors of electricity? 6. Does temperature influence the conductor's resistance? 7. What feature of the conductor is illustrated in Fig. 4? 8. What is the difference between a conductor and an insulator?. What insulators do you know? 10. Why are power transmission line wires bare? 11. What insulation is used on the cords of your electrical devices? 12. Can we do without insulators?